top of page
Zooz Z Wave Dimmer

Zooz Z Wave Dimmer

 
    NOTE: Check Wattage first: DON'T exceed 150 W for LED's or 500 W for incandescent. Do NOT connect this dimmer to ceiling fans, receptacles, tube lights, motors, or home appliances
    NEUTRAL WIRE REQUIRED

      SPECIFICATIONS:
      • Model Number: ZEN72
      • Z-Wave Signal Frequency: 908.42 MHz
      • Power: 120 VAC, 60 Hz
      • Maximum Loads: 500 W Incandescent, 150 W LED's
      • Z-Wave Range: Up to 300 feet line of sight between the Z-Wave hub and the closest Z-Wave repeater
      • Operating Temperature: 32-104� F (0-40� C)
      • Installation and Use: Indoor only

       
      Will it work with your smart speaker?
      Smart speakers are not Z-Wave controllers so you will need a compatible Z-Wave hub to control this dimmer with voice.
      Smart speaker compatible Z-Wave hubs include:
      • Fibaro Home Center Lite
      • SmartThings (or the Aeotec Smart Home Hub)
      • Hubitat
      • Wink
        

      •  NEW 700 SERIES Z-WAVE: Boost your network with the latest Z-Wave technology that offers more range and faster communication speed than ever before. Each dimmer will act as a signal extender making your smart home mesh reliable. And if you need to troubleshoot connectivity issues, access the built-in range test tool straight from your switch!  
      •  DIRECT 3-WAY: Wire it just like the Zooz ZEN22 model. Use it with existing on/off switches (NO dimmers) in a 3-way set-up, no need for add-on switches. Please follow the appropriate diagram in the manual and rewire both boxes exactly as shown. Works great as a single pole dimmer too! Neutral wire required (check your boxes before buying).  
      •  BETTER FIT: The new model is just 1.16" deep so it's easier to install it in a shallow or crowded box! There are no heat sink tabs either, just place it next to the other switches in a multi-gang box. And if you need a different color paddle, just ask Zooz for light almond, brown, or black options (NOT included, sold separately) - the white paddles can be replaced.  
      •  MORE FEATURES: Double tap to go from off to full brightness (single tap to last brightness level - now fully programmable if your hub supports advanced settings). Disable the relay and use the dimmer as a remote control for your smart bulbs, multi-tap triggers (aka scene control) available for if you have access to advanced features from your hub.  
      •  LATEST SECURITY: Equipped with the new S2 authenticated security protocol and SmartStart for instant and safe pairing. Z-Wave Plus and ETL certified for communication and safety standards compliance. Lifetime tech support.

      • Details

          NOTE: Check Wattage first: DON'T exceed 150 W for LED's or 500 W for incandescent. Do NOT connect this dimmer to ceiling fans, receptacles, tube lights, motors, or home appliances
          NEUTRAL WIRE REQUIRED

            SPECIFICATIONS:
            • Model Number: ZEN72
            • Z-Wave Signal Frequency: 908.42 MHz
            • Power: 120 VAC, 60 Hz
            • Maximum Loads: 500 W Incandescent, 150 W LED's
            • Z-Wave Range: Up to 300 feet line of sight between the Z-Wave hub and the closest Z-Wave repeater
            • Operating Temperature: 32-104� F (0-40� C)
            • Installation and Use: Indoor only


             Will it work with your smart speaker?
            Smart speakers are not Z-Wave controllers so you will need a compatible Z-Wave hub to control this dimmer with voice.
            Smart speaker compatible Z-Wave hubs include:
            • Fibaro Home Center Lite
            • SmartThings (or the Aeotec Smart Home Hub)
            • Hubitat
            • Wink


            • NEW 700 SERIES Z-WAVE: Boost your network with the latest Z-Wave technology that offers more range and faster communication speed than ever before. Each dimmer will act as a signal extender making your smart home mesh reliable. And if you need to troubleshoot connectivity issues, access the built-in range test tool straight from your switch!
            • DIRECT 3-WAY: Wire it just like the Zooz ZEN22 model. Use it with existing on/off switches (NO dimmers) in a 3-way set-up, no need for add-on switches. Please follow the appropriate diagram in the manual and rewire both boxes exactly as shown. Works great as a single pole dimmer too! Neutral wire required (check your boxes before buying).
            • BETTER FIT: The new model is just 1.16" deep so it's easier to install it in a shallow or crowded box! There are no heat sink tabs either, just place it next to the other switches in a multi-gang box. And if you need a different color paddle, just ask Zooz for light almond, brown, or black options (NOT included, sold separately) - the white paddles can be replaced.
            • MORE FEATURES: Double tap to go from off to full brightness (single tap to last brightness level - now fully programmable if your hub supports advanced settings). Disable the relay and use the dimmer as a remote control for your smart bulbs, multi-tap triggers (aka scene control) available for if you have access to advanced features from your hub.
            • LATEST SECURITY: Equipped with the new S2 authenticated security protocol and SmartStart for instant and safe pairing. Z-Wave Plus and ETL certified for communication and safety standards compliance. Lifetime tech support.

          • Item Code

          C$81.89Price
          Quantity

          Related Products

          • LinkedIn
          • Instagram
          • Facebook
          bottom of page